
Liposuction and fat grafting are among the most common procedures in aesthetic surgery, and the cannula is the instrument that does the work. The right cannula makes fat removal smoother, more even and gentler on tissue, while the wrong one can make a procedure slower and harder. This guide explains the main choices: the fitting, the diameter and length, the tip pattern, and how to keep cannulas clean.
Fittings: how the cannula connects
Cannulas connect either to a handle and suction tubing or directly to a syringe. The fitting decides which system the cannula works with, so it is the first thing to check.
- Luer Lock cannulas screw onto a standard Luer Lock syringe. They are widely used for fat harvesting and fat grafting, where syringes are used to collect and inject small volumes.
- Super Luer Lock cannulas use a Luer-type connection designed for a firm, secure fit. Check that they match the syringes and adapters you use.
- Threaded fitting cannulas screw into a handle, so one handle can be used with many cannulas.
- Super handle / aspiration handle cannulas are used with an aspiration handle and suction tubing for larger-volume liposuction.
Always check that the cannula fitting matches the handles, syringes and adapters you already use. Adapters can connect different systems, but a matched system is simpler and more secure.
Diameter and length
Smaller diameters remove fat more slowly but more evenly, with less risk of contour irregularities. They are used near the surface, in delicate areas, and for fat grafting. Larger diameters remove fat faster and are used in deeper layers and larger areas. Length depends on the area: short cannulas for the face, neck and small areas, longer cannulas for the abdomen, back and thighs. Most surgeons keep a range so they can change as they move from deep to superficial work.
Tip patterns
The number, size and position of the openings near the tip change how the cannula behaves. Blunt tips with one or a few openings are gentle and widely used. Multi-hole tips harvest small fat parcels, which many surgeons prefer for grafting. Sharper or more aggressive tips are used for fibrous areas. Injector (infiltration) cannulas have many small holes along the shaft to spread tumescent fluid evenly, or a single opening to place fat precisely during grafting.
Accessories
A complete system includes more than cannulas: handles, adapters to connect syringes and cannulas, transfer connectors for moving fat between syringes, cleaning brushes and a sterilization box. A cannula box keeps cannulas organised, protects the tips and makes counting easy before and after surgery.
Quality points to check
- The shaft should be straight and rigid, with no bends or dents.
- Openings should be smooth and burr-free, so they do not tear tissue.
- The lumen should be clear along its full length.
- Fittings should screw on smoothly and seal without leaking.
Cleaning: the most important step
Cannulas are hollow, so cleaning needs extra care. Flush every cannula straight after use, before fat and tissue can dry inside. Clean the lumen with a brush of the correct diameter, pushing it right through. An ultrasonic cleaner helps remove residue from the openings. Rinse thoroughly, dry the lumen completely, and then steam sterilize in a cannula box. Inspect openings regularly under good light, and replace cannulas that are bent or damaged.
Building a cannula set
A practical starter set covers a few diameters in short and medium lengths, with both blunt harvesting tips and infiltration cannulas, plus handles, adapters, brushes and a box. For a fat-grafting service, add fine Luer Lock harvesting and injection cannulas in several lengths. Tell us the procedures you perform and we will suggest a set.
See the complete range in liposuction cannulas and accessories, including injector, Luer Lock, Super Luer Lock, threaded and handle cannulas.
Talk to Medfort
Medfort Instruments manufactures in Sialkot, Pakistan, and supplies hospitals, clinics, distributors and tender buyers around the world. We make single instruments, bulk orders, complete sets and OEM or private-label ranges with your own laser marking. For prices, samples or a quote, email [email protected] or call / WhatsApp +92 349 0444976.